The Turbosound Milan M15B Sub has an on-board amplifier which provides over 2,200 watts of maximum output power, with plenty of headroom to power the long-excursion bass driver. This allows short term transients to be reproduced with wide dynamic range.
The Turbosound Milan M15B Sub
comes with two discrete balanced XLR inputs plus corresponding thru connections on balanced male XLR allow a stereo system comprising of two Milan full-range loudspeakers to be operated with only one subwoofer if required, the sub-bass frequencies being filtered and summed to the subwoofer drive unit. A switchable 3dB boost is available at a centre frequency between 40Hz and 90Hz, while an overall level control allows the sub-bass frequencies to be balanced with the system. A polarity switch is provided for optimum subwoofer integration. Rear panel LEDs indicate power on, signal present, and the onset of limiting action.
Features of the Turbosound Milan M15B Sub
Dimensions: (H x W x D) 495 x 530 x 480 mm
Net Weight: 37 kg
Components: 1 x 15″ (381 mm) LF driver
Frequency Response: 45Hz – 100Hz ±3dB
Calculated Max SPL: 134dB peak (half space)
Construction: Birch plywood, screwed and glued
Connectors: Input: 2 x female XLR wired pin 2 hot; Thru: 2 x male XLR wired pin 2 hot
Main Power: IEC connector with integrated fuse-holder
Spares & Accessories: LS-1535 15″ (381 mm) low frequency driver; RC-1535 Re-cone kit