Turbosound Milan M18B Sub


SKU: Turbosound Milan M18B Sub Categories: , Tag:


The Turbosound Milan M18B Sub has an on-board amplifier which provides over 2,200 watts of maximum output power, with plenty of headroom to power the long-excursion bass driver.

This allows short term transients to be reproduced with wide dynamic range.

Two discrete balanced XLR inputs plus corresponding thru connections on balanced male XLR allow a stereo system comprising of two Milan full-range loudspeakers to be operated with only one subwoofer if required, the sub-bass frequencies being filtered and summed to the subwoofer drive unit.

A switchable 3dB boost is available at a centre frequency between 40Hz and 90Hz, while an overall level control allows the sub-bass frequencies to be balanced with the system.

A polarity switch is provided for optimum subwoofer integration. Rear panel LEDs indicate power on, signal present, and the onset of limiting action.

Dimensions: (H x W x D) 590mm x 640mm x 530mm
Net Weight: 48kg
Components: 1 x 18″ (457mm) LF driver
Frequency Response: 40Hz – 100Hz ±3dB
Calculated Max SPL: 134dB peak (half space)
Construction: Birch plywood, screwed and glued
Connectors: Input: 2 x female XLR wired pin 2 hot; Thru: 2 x male XLR wired pin 2 hot
Main Power: IEC connector with integrated fuse holder
Spares & Accessories: LS-1819 18″ Low frequency driver; RC-1819 Re-cone kit


There are no reviews yet.

Be the first to review “Turbosound Milan M18B Sub”

Your email address will not be published. Required fields are marked *

3 × one =